Point level measurement

Non-contact level indicators Ecophyspribor is the set of devices that intended for detection of presence or absence of liquid or bulk material inside the tested vessel on the definite level.
The absence of contact between device components and tested material allows to use the Ecophyspribor level indicators for control of vessels filled with:

corrosive, abrasive, aggressive, toxic, biology-hazard materials;
molted and cryogenic materials;
foams, suspensions, slurries, powders, pulps, charges.

Temperature and pressure inside the vessel can be of any value.

1 - ecologically safe emitter
2 - high efficiency scintillation gamma detector
3 - data processing block

Ecophyspribor`s level indicators work quite clearly in the case of cone or funnel-shaped surfaces which are formed during filling or emptying the vessel.

Basic solutions of Point level measurements

Solutions with one detection block

Noncontact Level Switch BPU-1K

Minimal alteration from controllable level, which provides switching of relay contacts, mm, not more…………………………………. ±25