Noncontact Level Switch BPU-1K

Minimal alteration from controllable level, which provides switching of relay contacts, mm, not more…………………………………. ±25

Level Switch has the main binary output signal in the figure of solid state relay or unlubricated change-over contact of electromagnetic relay. The contacts change, if preset mean pulse frequency from detector units of threshold frequency reached.

• Maximum quantity of switched current
     for solid state relay reaches, ma,……………….............…............…120
     by the values of switched direct-current voltage, V,…............….…24
• Maximum quantity of switched current
     for electromagnetic relay reaches, A …………………...........……………5
     by the values of alternating voltage (50-60 Hz) V, not more ....…250

Settling time operation conditions of Level Switch
after its connection, min, not more,……………………...........…… 10.0

Power consumption, W, not more ………………………............…. 10.0

Operating mode of Level Switch ......................................24-hour

Range of environmental temperature variation, whereby the Level Switch provides normal operation, ˚C:

• for detector unit …………………………............…………-40...+70
• for information handling unit ……………..........…...…-20...+60
• for low-temperature information handling unit …… –40…+50