No Flash site map



Русский contacts


Ecophyspribor is the pioneer in creation of new environmentally safe radiation technology, development and manufacturing of non-contact devices for process control.
Unlike other enterprises using high-activity radioactive sources with massive protective containers, we use Na-22 source with small activity (less than minimum significant activity – MSA). Cassettes containing such source are more compact and do not require any special permission for their operation and utilization.
Ecophyspribor is looking for business partners, dealers and new agents all over the world.
We will be very glad to cooperate with you.



solutions

Point level measurement

Non-contact level indicators Ecophyspribor is the set of devices that intended for detection of presence or absence of liquid or bulk material inside the tested vessel on the definite level.
The absence of contact between device components and tested material allows to use the Ecophyspribor level indicators for control of vessels filled with:

corrosive, abrasive, aggressive, toxic, biology-hazard materials;
molted and cryogenic materials;
foams, suspensions, slurries, powders, pulps, charges.

Temperature and pressure inside the vessel can be of any value.

vessel100206W 1 - ecologically safe emitter
2 - high efficiency scintillation gamma detector
3 - data processing block

Ecophyspribor`s level indicators work quite clearly in the case of cone or funnel-shaped surfaces which are formed during filling or emptying the vessel.

Continuous level measurement

vessel200206W

vessel130206B4W

1 - ecologically safe radiation source
2 - high efficiency scintillation gamma detector
3 - data processing block

Non-contact level meters Ecophyspribor is the set of devices that intended for non-contact level measurement  of liquid or bulk materials behind the wall inside the tested vessel.

Density meter IPB-1K Ecophyspribor

Ecophyspribor noncontact Densitу meters are a set of devices for non-contact density measurement of liquids and pulps inside various vessels and entirely filled pipes.
The absence of contact between device components and tested material allows to use the Ecophyspribor Density meters for control vessels filled with:

corrosive, abrasive, aggressive, toxic, biohazardous materials;
molted and cryogenic materials;
foams, suspensions, slurries, powders, pulps, charges.

Temperature and pressure inside the vessel can be of any value.


+7 (495) 797-6425
advantage
© "EcoPhysPribor" 2005-2016 Tel. +7-495-797-6425 E-mail: mail@ecophyspribor.ru